We are pleased to add to our highly successful pump controller range, the TDS controller has all the features of our controls developed over the years.
Easy to use 3 button interface
Micro DE detection
Low battery detection
Pressure switch detection
Low Battery cut off overide
Works with all microbore hoses
We have added a TDS probe to the controller provding two valuble features
Monitoring of Total Dissolved Solids in the water
Monitoring Water temperature
We recommend that the TDS probe be fitted after the pump and in line between the pump and hose supplying your pole and brush. In this way you can have complete piece of mind that the water you are using is of the quality you need for excellent results every time.
No more carrying around a TDS meter in your pocket only to find it is not working. Ideal for those wth a van or trailer mounted DI and RO system. Fll your tank any where with confidence that you know the TDS value of the water before you start to clean
The probe will also monitor water temperature and can be used with a water heater in a hot water system. Easily upgrade your system to hot water by addng a separate heater. Speed through those dfficult 1st cleans and bulders cleans. Plus the added benefit of monitoring water temperature during the wnter months. Avoid your system freezing.
Note: This control does not have frost protection: Should you want a controller that will provide frost protection and full heater control we would reccommend the hot water controller.