Kit to Convert your Water-Fed pole into a High Pressure water pole!
These kits operate as follows:
Designed to fit to any of the XTEL pole range, you will need to remove the top 2 sections from your pole and slot the metal lance into the top clamp of the 3rd section. This means that if you want to end up with a pole with a 25ft reach you would need to have a 35ft XTEL pole as removing the top 2 sections will bring it down approximately 10ft in size.
The high pressure hose will then run down the inside of the pole as normal and you can fix the trigger to the bottom section of your pole. The trigger screws through the base section of the pole, therefore the collapse length is increased by approximately 8 inches.
Kit comes complete with nozzle and quick connect so extra nozzle can be fitted if need be. Trigger ends in 3/8" BSP Female which makes it very easy to suit most high pressure set-ups with minimal extra fittings.