Unger Rinse N Go Pure Water Cleaning Kit

The Unger Rinse 'n' Go Pure Water Cleaning Kit is available in two main versions, AK158 and AK159, which differ primarily in the length of the included telescopic pole. Both kits use a deionization filter to create 100% pure, mineral-free water, which dries without leaving streaks or spots. They are designed to connect directly to a standard garden hose. 

Unger Rinse 'n' Go Kit AK158 (1.5m pole)

The AK158 model is ideal for cleaning lower-level surfaces such as cars, small vans, and ground-floor windows. 

Telescopic pole: A 2-section, 1.5-meter aluminium pole with a working reach of up to 3 meters.

Applications: Well-suited for 4x4s, boats, garage doors, and windows on bungalows or ground floors.

Kit includes: 1.5m telescopic pole, 20m hose pipe, 27cm water-fed brush, Pure Water filter with one 2L resin bag, and a TDS meter. 

Unger Rinse 'n' Go Kit AK159 (4.5m pole)

The AK159 model is designed for higher-reaching applications, including conservatories, solar panels, and taller vehicles. 

Telescopic pole: A 3-section, 4.5-meter aluminium pole that provides a working reach of up to 6 meters.

Applications: Suitable for windows, glass facades, conservatories, vehicles, solar panels, soffits, and gutters.

Kit includes: 4.5m telescopic pole, 20m hose pipe, 27cm water-fed brush, Pure Water filter with one 2L resin bag, and a TDS meter. 

Comparison of Unger AK158 and AK159

Feature Unger Rinse 'n' Go Kit AK158 Unger Rinse 'n' Go Kit AK159

Telescopic pole 1.5m, 2-section aluminium pole 4.5m, 3-section aluminium pole

Maximum reach Up to 3 meters Up to 6 meters

Best for Ground-floor windows, cars, small vans Second-floor windows, conservatories, solar panels

How the system works

Attach to a tap: Connect the system to a standard outdoor tap using a garden hose.

Filter water: Tap water flows through the filter's deionization resin, which removes minerals that cause spots and streaks.

Monitor purity: The included TDS (Total Dissolved Solids) meter allows you to check the purity of the water. A reading of 000 indicates the water is pure.

Rinse and let dry: Use the water-fed brush to clean the surface, and then rinse with the pure water. The surface can be left to air-dry, and it will be spotless.

Replace resin: When the TDS meter reading starts to increase, it indicates that the resin is saturated and needs to be replaced.