Tel: 02081774133 / 02033841428 | Email: | Log-in
 
Product PagesCatalogueClearanceSpecial OffersWindow CleaningCarpet CleaningWorkwearPressure WashingJanitorialCar WashSafetyVan equipmentHigh level CleaningLitter PickingGraffiti removalPest controlNewest Products
payment secured via SagePay

TDS Meters

spacer
spacer
spacer
spacer
TDS meter with case with thermometer

TDS meter with case with thermometer

QuantityPrice each
1+ £13.11 (£15.73 Inc VAT)
10+ £10.19 (£12.23 Inc VAT)

* Ideal for commercial use. Includes a carrying case with belt clip.
* Highly efficient and accurate due to its advanced microprocessor technology.
* Hold Function: saves measurements for convenient reading and recording.
* Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
* Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
* Built-in digital thermometer
* Display: large and easy-to-read LCD screen.
* Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
* Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).


Ref: TDS3

Quantity:

People who bought this item also bought:
1. 25L Cedelite highest grade Virgin mixed bed DI resin (Ref: VIRG)
2. Mini Hose tail 6mm (Ref: 21SFTF06)
3. 11L Vessel complete full of DI resin (Ref: PVMF)
spacer

ZT-2 Basic TDS Tester

£11.74 (£14.09 Inc VAT)

Though inexpensive, this meter does not skimp on quality, features and design.
Features

* Economy model that is ideal for end-users and retail products.
* Highly efficient and accurate due to its advanced microprocessor technology.
* Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
* Measurement Range: 0-999 ppm.
* Display: large and easy-to-read LCD screen.
* Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution.

Specifications
Range: 0 - 999 ppm (mg/L)
Resolution: 1 ppm (0-999 ppm)
Accuracy: +/- 3%
Conversion Factor: NaCl (avg. 0.5)
Power source: 2 x 1.5V button cell batteries (included)
Battery life: Approx. 1000 hours of usage
Dimensions: 14 x 2.3 x 1.5 cm (5.5 x 0.9 x 0.75 inches)
Meter weight: 31.2g (1.1 oz)

Ref: ZT-2

Quantity:

People who bought this item also bought:
1. 25L Cedelite highest grade Virgin mixed bed DI resin (Ref: VIRG)
2. 11L Vessel complete full of DI resin (Ref: PVMF)
3. Mini Hose tail 6mm (Ref: 21SFTF06)
spacer

Economy TDS meter EZ

£12.19 (£14.63 Inc VAT)

* Economy model that is ideal for end-users.
* Highly efficient and accurate due to its advanced microprocessor technology.
* Hold Function: saves measurements for convenient reading and recording.
* Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
* Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
* Display: large and easy-to-read LCD screen.
* Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
* Fun, translucent blue housing that's very strong and durable.
* Includes a TDS chart sticker on the back of the meter that explains TDS values.
* Comes in a retail-oriented package.

Ref: TDS-EZ

Quantity:

People who bought this item also bought:
1. 25L Cedelite highest grade Virgin mixed bed DI resin (Ref: VIRG)
2. Yellow PVC Hose 5mm (8mm OD) per meter (Ref: H5Y)
3. Standard angle adaptor (Ref: AD1)
spacer

AquaPro Water Quality TDS meter

£15.39 (£18.47 Inc VAT)

# Measures total dissolved solids (TDS) and temperature.
# Automatic Temperature Compensation (ATC)
# Water-resistant housing
# Measurement Range: 0-5000 ppm
# Digital Calibration (push button)
# Auto-off function, data-hold function and low-battery indicator.
# Display: large and easy-to-read LCD screen includes simultaneous temperature reading.
# Factory Calibrated: The AquaPro is calibrated with a 342 ppm NaCl solution. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver.
# Includes a cap and batteries

Ref: AP1

Quantity:

People who bought this item also bought:
1. 25L Cedelite highest grade Virgin mixed bed DI resin (Ref: VIRG)
2. 100psi Aquatec Pump / Variflo+ Digital / Fittings and Strainer (Ref: PACK2)
3. Jubilee O clips 13-15 mm for minibore hose (Ref: 1315)
spacer
Waterproof In line TDS meter

Waterproof In line TDS meter

£36.23 (£43.48 Inc VAT)

Waterproof In line TDS meter, supplied with Tee quick fit 1/4"


Ref: DM2

Quantity:

People who bought this item also bought:
1. Tee - barb to male 1/2" thread (Ref: 35)
2. Pole control Valve (Ref: 3025)
3. 40" Reverse Osmosis housing (Ref: RH40)
spacer
Calibration solution 342 ppm

Calibration solution 342 ppm

£3.65 (£4.38 Inc VAT)

Calibration solution 342 ppm to re-calibrate your meters periodically.

Ref: TDSCS

Quantity:

People who bought this item also bought:
1. Mini Hose tail 6mm (Ref: 21SFTF06)
2. Mini Endstop microbore size 6mm (Ref: 21KATF-6)
3. 90 degree Swivel connector (Ref: BHC90)
spacer
TDS4 Pocket-Size Meter

TDS4 Pocket-Size Meter

168626442+ £0.00 (£0.00 Inc VAT)

One TDS meter, two versions: TDS4 and TDS4-TM.

TDS4-TM has a built in thermometer, this is the version shown in the picture

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver.

FEATURES:
* TDS4-TM version includes an internal digital thermometer (celsius).
* The smallest and lightest TDS meter available on the market.
* Hold Function - Saves measurements for convenient reading and recording.
* Auto-off function - Turns off meter after 10 minutes of non-use to conserve batteries.
* Dual Range - Measures from 0 - 999 ppm, with a resolution of 1ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.
* Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
* Recommended for aquariums & aquaculture, horticulture & hydroponics, pools & spas and water cooler professionals.

SPECIFICATIONS:
TDS Range: 0-9990 ppm (mg/L)
Temp. Range: 0-80 degrees Celsius (TDS4-TM version)
Resolution: 1 ppm, 1 degree Celsius (TDS4-TM version)
Accuracy: +/- 2%
Conversion Factor: NaCl (avg. 0.5)
ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Farenheit)
Power source: 2 x 1.5V button cell batteries (included) (357A)
Battery life: 1000 hours of usage
Dimensions: 14 x 2.3 x 1.5 cm (5.5 x .9 x .55 inches)
Weight: 34g (1.2 oz)

Ref: TDS4

Options

customer choice

type

Quantity:

People who bought this item also bought:
1. Complete Resinsaver DI vessel with funnel (Ref: SPEC)
2. Hose Ball (Ref: HB12)
3. Professional Hose tail (Ref: 19SFT06)
spacer
AquaPro Water Quality Tester (EC)

AquaPro Water Quality Tester (EC)

£20.25 (£24.30 Inc VAT)

HM Digital introduces its new AquaPro series, a line of handheld TDS/EC meters with a sleek design that's perfect for today's modern kitchen. The AquaPro digital water testers are the next generation for today's tech-savvy and health-conscience consumer.

FEATURES

* Measures electrical conductivity (EC) and temperature.
* Automatic Temperature Compensation (ATC)
* Water-resistant housing
* Measurement Range: 0-9999 µS
* Digital Calibration (push button)
* Auto-off function, data-hold function and low-battery indicator.
* Display: large and easy-to-read LCD screen includes simultaneous temperature reading.

SPECIFICATIONS
EC Range: 0-9999 µS
Temperature Range: 0-80 °C; 32-176 °F
Resolution: 1 µS; Temp. resolution is 0.1 °C/F
Accuracy: +/- 2%
Calibration: Digital calibration by push button.
Housing: Water-resistant
Power source: 1 x 3V button cell (included) (model CR2032)
Dimensions: 15 x 2.8 x 1.3 cm (5.9 x 1.1 x .5 inches)
Weight: 42.5 g (1.5 oz)

Ref: AP2

Quantity:

People who bought this item also bought:
1. Pair of Bracket for stainless steel RO housing (Ref: SSBR)
2. 40" Reverse Osmosis housing (Ref: RH40)
3. Male nylon elbow hose tail 1/2 x 3/8 thread (Ref: MHT12-38)
spacer

Waterproof EC/TDS/Temp combo meter

£40.79 (£48.95 Inc VAT)

Ideal for all water quality testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment and more.

SPECIFICATIONS

EC Range: 0 - 9990 µS; 0 - 9.99 mS
TDS Range: 0 - 8560 ppm (mg/L); 0 - 8.56 ppt
Temperature Range: 0-80 °C; 32-176 °F
Resolution: 0-99: 0.1 µS/ppm/mS/ppt; 100-999: 1 µS/ppm; 1000-9990: 10 µS/ppm. Temp. resolution is 0.1 °C/F
Accuracy: +/- 2%
EC to TDS Conversion Factor: Non-linear conversions for KCl, 442TM or NaCl solutions, selected by the user.
Calibration: Digital calibration by push button.
Probe: Detachable platinum electrodes
Housing: IP-67 Waterproof (submersible; floats)
Power source: 3 x 1.5V button cell batteries (included) (model 357A)
Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)
Weight: 90.7g (3.2 oz)
FEATURES
* Measures electrical conductivity (EC), total dissolved solids (TDS) and temperature.
* UPGRADED: Four scales: µS, mS, ppm, ppt (mS and ppt are new)
* Three different non-linear EC-to-TDS conversion factors (KCl, 442TM, NaCl).
* Automatic Temperature Compensation (ATC) using three temperature coefficients
* Waterproof housing (IP-67 rating)
* Measurement Range: 0-9990 µS; 0-8560 ppm; 0-9.99 mS; 0-8.56 ppt
* Digital Calibration (push button) to any point within the meter's range
* Auto-off function, data-hold function and low-battery indicator
* Display: large and easy-to-read LCD screen includes simultaneous temperature reading.
* Replaceable Sensor (model SP-C1)
* Factory Calibrated: The COM-100 meter is calibrated with a 1413 µS solution. The meter can be recalibrated with digital calibration using the push buttons, rather than a screwdriver.
* Includes a cap, batteries and lanyard.

Ref: COM100

Quantity:

People who bought this item also bought:
1. Calibration solution 342 ppm (Ref: TDSCS)
spacer

Waterproof pH Meter

£49.99 (£59.99 Inc VAT)

Ideal for all pH testing, water purification applications, wastewater regulation, aquaculture, hydroponics, colloidal silver, labs & scientific testing, pools & spas, ecology testing, boilers & cooling towers, water treatment, wine, coffee, agriculture and more.

FEATURES
* Measures pH and Temperature
* Auto-ranging three point calibration with digital fine tuning
* Includes storage solution in a sponge embedded in a clear cap
* Waterproof housing (IP-67 rating)
* Simultaneous temperature display
* Measurement Range: 0-14 pH
* Digital automatic calibration (one point), with digital fine tuning
* Automatic Temperature Compensation (ATC)
* Auto-off function, data-hold function and low-battery indicator
* Display: large and easy-to-read LCD screen includes simultaneous temperature reading
* Replaceable Sensor (model SP-P2)

SPECIFICATIONS
pH Range: 0 - 14
Temperature Range: 0-80 °C; 32-176 °F
Resolution: 0.01 pH; Temperature resolution is 0.1 °C/F
Accuracy: +/- 0.02 pH
Calibration: Digital automatic calibration (one point) with digital fine tuning
Electrode: Replaceable glass sensor and reference tube electrodes
Housing: IP-67 Waterproof (submersible; floats)
Power source: 3 x 1.5V button cell batteries (included)
Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)
Weight: 96.4 g (3.4 oz)

Ref: PH200

Quantity:

People who bought this item also bought:
1. Waterproof ORP Meter (Ref: ORP200)
spacer

Waterproof ORP Meter

£53.84 (£64.61 Inc VAT)

Ideal for all ORP testing, including anti-oxidant measurement, water purification applications, ionizers, agriculture, aquariums & aquaculture, chlorine monitoring, cooling tower disinfection, environmental testing, fruit & vegetable washing, hydroponics, metal finishing, ozone system monitoring, pharmaceutical & medical applications, pools & spas, pulp bleaching, vineyards & wineries and water treatment.
FEATURES

* Measures Oxidation Reduction Potential (Redox) and Temperature
* Auto-ranging calibration with digital fine tuning
* Includes storage solution in a sponge embedded in a clear cap
* Waterproof housing (IP-67 rating)
* Simultaneous temperature display
* Digital Calibration (push button)
* Auto-off function, data-hold function and low-battery indicator.
* Display: large and easy-to-read LCD screen includes simultaneous temperature reading.
* Replaceable Sensor (model SP-O2)
* Factory Calibrated: The ORP-200 meter is factory calibrated to +200 mV The meter can be easily recalibrated with digital calibration using the push buttons, rather than a screwdriver.
* Includes a cap, batteries, and lanyard

SPECIFICATIONS
ORP Range: -999 to +1000 mV
Temperature Range: 0-80 °C; 32-176 °F
Resolution: 1 mV; Temperature resolution is 0.1 °C/F
Accuracy: 0.5% (+/- 2mV)
Calibration: Digital calibration by push button.
Electrode: Replaceable glass sensor and reference tube electrodes
Housing: IP-67 Waterproof (submersible; floats)
Power source: 3 x 1.5V button cell batteries (included)
Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)
Weight: 96.4 g (3.4 oz)

Ref: ORP200

Quantity:

People who bought this item also bought:
1. Waterproof pH Meter (Ref: PH200)
spacer

Quick Check TDS/Conductivity Monitor

£16.19 (£19.43 Inc VAT)

Press the "Push-to-Check" button for an instant water quality check!

FEATURES
* With the push of a button, the unit displays a green or red light, indicating good water quality or service required, respectively.
* Tests for TDS or conductivity levels.
* Eight programmable set points (by dip switch).
* Bright LED lights.
* Simple to use.
* Factory Calibrated to 100 ppm NaCl. Re-calibration is unncessary.
* Comes equipped with Mur-lok® Quick-Connect T-fitting (1/4 inch standard, also available in 3/8" or 1/2" ).
* Excellent Reverse Osmosis (RO) or Deionization (DI) monitor
* Installs quickly and easily.

SPECIFICATIONS

TDS/EC Range: 0-5000 ppm (10,000 µS)
Max. Set Point: 50 ppm (100 µS)
Accuracy: ±3%
ATC: No
Cable Length: 24.5" (including sensor)
Fittings: 1/4"
Power source: 4 x 1.5V button cell batteries (included)
Battery life: Approx. one year
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
Weight: 39.7 g (1.4 oz.) (not including sensor)

Ref: QC1

Quantity:

People who bought this item also bought:
1. ZT-2 Basic TDS Tester (Ref: ZT-2)
2. 25L Cedelite highest grade Virgin mixed bed DI resin (Ref: VIRG)
3. 40" Reverse Osmosis housing (Ref: RH40)
spacer

DM-1: In-Line Dual TDS Monitor

£20.99 (£25.19 Inc VAT)

Measure the tap water coming in vs. the purified water going out of your water filtration system at any time.

FEATURES
* Displays TDS levels of the feed water and product water with in & out electrode probes.
* Highly efficient and accurate due to its advanced microprocessor technology.
* Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
* Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
* Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
* Comes equipped with Mur-lok® Quick-Connect T-fittings.
* Installs quickly and easily.

SPECIFICATIONS
Range: 0-9990 ppm
Accuracy: ±2%
Conversion Factor: NaCl (avg. 0.5)
Cable Length: 24.5" (including sensor)
Fittings: 1/4" standard
Power source: 2 x 1.5V button cell batteries (included)
Battery life: approx. 1000 hours of continuous use
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
Weight: 79.4 g (2.8 oz.)

Ref: DM1

OUT OF STOCK

People who bought this item also bought:
1. 10" Cartridge sediment filter 5 microns (Ref: CS5F10)
2. John Guest type female adaptor 1/4 tube X 1/2 thread (Ref: 419)
3. Chlorplus 10 Carbon Block Filter (Ref: CH10)
spacer

HM-Digital Filter Monitor

£46.95 (£56.34 Inc VAT)

The new Filter Monitor is an innovative system to alert when a filter needs to be changed via color-coded lights at the base of the faucet. The battery-powered FM-1 has five timers for a 5-stage system and programmable set-points and alarms for each function, all in a crisp, attractive housing.

FEATURES
* A five-stage filter monitor with five independent timers and a tri-color LED faucet indicator disc.
* Works on time (and volume for the FM-2) for up to five stages (can be less).
* The LED indicator disc will illuminate a green, yellow or red light when the water is turned on. The color indicates the percentage of elapsed time.
* Auto-Off function conserves battery power. The unit shuts off automatically after 5 minutes of non-use.
* The timer counts down in months or days (settings can be modified).
* Includes an audible alarm (beep).
* Modern design is perfect for any kitchen.
* Includes the FMS-1 Water Flow Switch.
* Installs quickly and easily.

SPECIFICATIONS
Timer Range: 0-999 days/months
Timer Modes: Days or months (default is months)
Settings: One alert per stage, up to five stages
Default Setting: 12 months
Batteries: 2 x AA (included)
Battery Life: approx. 18 months
Base Unit Dimensions: 100 x 63 23 mm (4 x 2.5 x 0.9 in)
Base Unit Weight: 119 g (4.2 oz.) (including batteries)
Flow Switch Cable Length: 93 cm (36.6 in)
Flow Switch Fitting Size: 1/4" Quick Connect
LED Faucet Indicator Disc Cable Length: 92 cm (36.25 in)
LED Faucet Indicator Disc Dimensions: 4.75 (1 1/4" in.) dia., 8 cm (5/16") high

Ref: FM1

Quantity:

People who bought this item also bought:
1. FlipFast Quick release kit (Ref: QRAAA)
2. FlipFast quick release angle adapter (Ref: QRAA)
3. 40" Axeon HF5 4040 Ultra-low pressure Reverse Osmosis membrane (Ref: HF5-4040)
spacer
Battery for HM digital TDS meters and PH meters

Battery for HM digital TDS meters and PH meters

£0.59 (£0.71 Inc VAT)

Battery for HM digital TDS meters and PH meters

Ref: TDSB1

Quantity:

People who bought this item also bought:
1. Hose connector 1" (Ref: 3040)
2. Xtel Clamp Nut (Ref: XTELN)
3. Xtel Clamp Bolt (Ref: XTELB)
spacer
spacer