Unger HydroPower Ultra + nLite pole

Everything you need to start window cleaning with pure water

Window cleaning system to reach and wash at heights of up to 10m (33ft).

Perfect for cleaning windows and building facades, solar panels, vehicles and much more!

Efficient pure water filter for low water needs and small surfaces.

    * Produces 100% pure water

    * Including fine filter, for pre-filtering of the water

    * Complete with TDS meter to measure inflow and outflow PPM (parts per Million)

    * Mobile use on site.

    * Stored on practical trolleys with large rubber rolls and tilt protection

    * Requires no electricity.

    * Standard garden hose connection.

    * Compatible with Unger Ultra Resin Packs.

The Unger HydroPower Ultra is setting a new standard in deionising filter technology for pure water cleaning. A definite value-add for every professional window cleaner and cleaning specialist.

Ultra Resin Packs deliver over 30% more pure water per resin fill:

The FloWater 2.0 technology in each Ultra Resin Pack provides an efficient water flow through the entire tank, optimising resin utilisation.

The Premium Ultra Resin is a new ion exchange resin specially perfected for the requirements of glass cleaning.

The digital TDS meter indicates at the touch of a button when the Ultra Resin Packs need to be replaced. The Ultra Resin Packs can be changed as easily and quickly as a coffee pad in a coffee machine.

The sturdy stainless steel hose connectors are equipped with a practical shut-off valve to prevent leakage during transport. A pre-installed dynamic control system guarantees optimum water flow at all times.

Pure water fed pole window cleaning system includes:

Contents:

Unger HydroPower Ultra Filter Product Comparison

In particular the water hardness and the hydrogen carbonate content of the input water have a strong influence on the amount of pure water. The following values corrspond to the output of Unger Hydropower Ultra with average tap water:

The pure water quantities (TDS < 10ppm) were determined by an independent test laboratory at a water flow rate of 180l/h and under the following conditions of the input water:

TDS:275 ppm

Sum of cations and anions: 5.5 meq/l

Hydrogen carbonate content of anions: 60%

With soft water (<100 ppm) the pure water output can increase more than 3 times. With very hard water (>400 ppm), depending on the hydrogen carbonate content and ion concentartion, the output can decrease by more than half.

The conductivity measurement is used to monitor water quality, If conductivity measurement (integreted TDS meter) indicates a value of > 10ppm, the resin must be replaced.